| Valve function | 5/2 monostable |
| Actuation type | Electrical |
| Standard nominal flow rate (standardised to DINa1343) [l/min] | 1.100 |
| Operating pressure [bar] | -0.9 to 16 |
| Construction set up | Piston pusher |
| Reset mode | Mechanical spring |
| Permission |
C-tick, c UL us - Recognized (OL) |
| Protection category |
IP65, NEMA 4 |
| Nominal width [mm] | 9 |
| Exhaust function |
drosselbar, über Drosselplatte, über Einzelanschlussplatte |
| Sealing principle | Soft |
| installation position | arbitrary |
| Complies to standard |
ISO 15407-1, VDMA 24563 |
| Hand assist actuation | Covered |
| Control type | pilot operated |
| Control air supply | external |
| Flow direction | arbitrary |
| lap | positive Überdeckung |
| Signal condition display | With Accessories |
| lap [l/min] | 1.400 |
| Flow valve single connection plate [l/min] | 1.100 |
| Flow valve pneumatically linked [l/min] | 1.100 |
| Shifting time off [ms] | 41 |
| Shifting time on [ms] | 21 |
| Power-on time | 100 % |
| Max. positive test impulse at 0 signal [µs] | 1.000 |
| Max. negative test impulse for 1 signal [µs] | 800 |
| Coil characteristic value | 24 V DC: 1,8 W |
| Permitted voltage oscillations | -15 % / +10 % |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible (required in further operations) |
| Oscillation strength | Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Information about operating and control medium [°C] | -5 to 50 |
| Relative humidity | 0 - 90 % |
| Sound pressure level [dB(A)] | 85 |
| LABS (PWIS) conformity [°C] | -5 to 50 |
| Max. tightening torque Valve fastening [Nm] | 1.8 to 2.2 |
| Electrical connection |
Wiring diagram Form C acc. to EN 175301-803, without protective earthing conductor, acc. to EN 175301-803 |
| Fastening type | on connection plate |
| Exhaust control connection 82/84 |
Not recorded, Selectively:, Recorded |
| Pneumatic connection 1 | Connection plate Size 26 mm to ISO 15407-1 |
| Pneumatic connection 2 | Connection plate Size 26 mm to ISO 15407-1 |
| Pneumatic connection 3 | Connection plate Size 26 mm to ISO 15407-1 |
| Pneumatic connection 4 | Connection plate Size 26 mm to ISO 15407-1 |
| Pneumatic connection 5 | Connection plate Size 26 mm to ISO 15407-1 |
| Pre-control interface | acc. to ISO 15218 |
| Material information | RoHs compliant |
| Seals material |
FKM, NBR |
| Housing material |
PA, Aluminium die casting |
| Screws material | Zinc-plated steel |
| Material information [bar] | 3 to 10 |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Build.width [mm] | 26 |
| KC-mark | KC-EMV |
| Certified awarding point | UL MH19482 |
| Measurement principle | Inductive |
| UKCA marking (see declaration of conformity) | for all electrical connections |
| Switching position query | Idle position with sensor |
| Noise status indicator | LED |
| Valve - sensor switching time on [ms] | 60 |
| Valve - sensor switching time off [ms] | 11 |
| Nominal operating voltage DC [V] | 24 |
| Control output | PNP |
| Operating voltage range DC sensor [V] | 10 to 30 |
| Short circuit resistance sensor | Cycling |
| Empty run sensor [mA] | <= 10 mA |
| Max. output current sensor [mA] | 200 |
| Max. switching frequency sensor [Hz] | 5.000 |
| Residual ripple sensor | ± 10 % |
| Sensor voltage drop [V] | <= 2 V |
| Sensor connection |
M8x1, 3 pin, Plug |
| Support air control connection 12/14 | Connection plate Size 26 mm to ISO 15407-1 |
| Switching element function | NC contact |
| {{ $t('shop.all.gewicht') }} | 260 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568207595 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84812090 |
| {{ $t('shop.all.hersteller') }} | Festo |