Karta informacyjna
HGPD-25-A (1132942) parallel gripper
Numer artykułu:
OT-FESTO032721
Przykładowe przedstawienie
Właściwości
| size | 25 |
| Stroke per gripper jaw [mm] | 6 |
| Max. exchange precision [mm] | <= 0,2 mm |
| Max. gripper jaw play ax, ay [deg] | <= 0,1 deg |
| Max. gripper jaw play Sz [mm] | <= 0,02 mm |
| Rotational symmetry [mm] | <= 0,2 mm |
| Repeatability grippers [mm] | <= 0,04 mm |
| Quantity Gripper jaws | 2 |
| installation position | arbitrary |
| Principle of operation | double acting |
| Gripper function | Parallel |
| Construction set up |
Inclined plane, Force controlled movement cycle |
| Position detection | For proximity switch |
| Open total gripping force at 6 bar [N] | 288 |
| Close total gripping force at 6 bar [N] | 266 |
| Operating pressure [bar] | 3 to 8 |
| Operating pressure blocking air [bar] | 0 to 0.5 |
| Max. working frequency gripper [Hz] | <= 3 Hz |
| Min. opening time a 6 bar [ms] | 29 |
| Min. closing time at 6 bar [ms] | 35 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible (required in further operations) |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
| Protection category | IP65 |
| ambient temperature [°C] | 5 to 60 |
| Open gripper jaws at gripping force of 6 bar [N] | 144 |
| Close gripper jaws at gripping force at 6 bar [N] | 133 |
| Mass inertia [kg/cm²] | 1,32 |
| Max. force on gripper jaws Fz static [N] | 500 |
| Max. torque on gripper jaws Mx static [Nm] | 30 |
| Max. torque on gripper jaws My static [Nm] | 25 |
| Max. torque on gripper jaws Mz static [Nm] | 15 |
| Lubrication interval guide elements [Mio SP] | 5e+006 |
| Max. mass per external griper finger [g] | 138 |
| Fastening type |
With Throughway bore and dowel pin, With Female thread and dowel pin, Selectively:, Female thread and centring sleeve, With Throughway bore and centring sleeve |
| Pneumatic connection blocking air | M5 |
| Pneumatic connection | M5 |
| Material information | RoHs compliant |
| Cover cap material | High-alloyed stainless steels |
| Housing material |
aluminium, anodized |
| Gripper jaws material |
hardened, Steel |
Więcej informacji
| Ciężar | 390 g / Szt. |
| GTIN | 4052568227074 |
| Numer towaru podlegającego ocleniu | 84798997 |
| Producent | Festo |
W celu uzyskania dalszych informacji na temat tego artykułu, jak również w celu jego zamówienia należy odwiedzić nasz sklep internetowy https://www.landefeld.de i odnaleźć numer artykułu OT-FESTO032721.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Niemcy
Podawane informacje są niezobowiązującymi danymi orientacyjnymi! Nie ponosimy odpowiedzialności za dane wybrane bez pisemnego potwierdzenia. Dane ciśnienia dotyczą, o ile nie podano inaczej, płynów z grupy II w temperaturze +20°C.
Stan: 09.07.2025