Data sheet
HGPD-50-A (1132951) Parallel gripper
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO032768
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| size | 50 |
| Stroke per gripper jaw [mm] | 12 |
| Max. exchange precision [mm] | <= 0,2 mm |
| Max. angular gripper jaw backlash ax, ay [deg] | <= 0,1 deg |
| Max. gripper jaw play Sz [mm] | <= 0,02 mm |
| Rotational symmetry [mm] | <= 0,2 mm |
| Repeatability grippers [mm] | <= 0,05 mm |
| Quantity Gripper jaws | 2 |
| installation position | arbitrary |
| Principle of operation | double acting |
| Gripper function | Parallel |
| Construction set up |
Inclined plane, Force controlled movement cycle |
| Position detection | For proximity switch |
| Open total gripping force at 6 bar [N] | 944 |
| Close total gripping force at 6 bar [N] | 894 |
| Operating pressure [bar] | 3 to 8 |
| Operating pressure blocking air [bar] | 0 to 0.5 |
| Max. working frequency gripper [Hz] | <= 2 Hz |
| Min. opening time a 6 bar [ms] | 90 |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) [ms] | 100 |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible (required in further operations) |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
| Information about operating and control medium | IP65 |
| ambient temperature [°C] | 5 to 60 |
| LABS (PWIS) conformity [N] | 472 |
| Suitability for the production of Li-ion batteries [N] | 447 |
| Mass inertia [kg/cm²] | 26,19 |
| Max. force on gripper jaws Fz static [N] | 2.000 |
| Total gripping force, opening, 0.6MPa (6bar, 87 psi) [Nm] | 90 |
| Total gripping force, closing, 0.6MPa (6bar, 87 psi) [Nm] | 60 |
| Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) [Nm] | 50 |
| Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) [Mio SP] | 5e+006 |
| Max. mass per external griper finger [g] | 318 |
| Fastening type |
With Throughway bore and dowel pin, With Female thread and dowel pin, Selectively:, Female thread and centring sleeve, With Throughway bore and centring sleeve |
| Pneumatic connection blocking air | M5 |
| Pneumatic connection | G1/8 |
| Material information | RoHs compliant |
| Cover cap material | High-alloyed stainless steels |
| Housing material |
aluminium, anodized |
| Gripper jaws material |
hardened, Steel |
Further information:
| {{ $t('shop.all.gewicht') }} | 1,9 kg / pcs |
| {{ $t('shop.all.gtin') }} | 4052568227166 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84798997 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.de under item number OT-FESTO032768.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 08.12.2025