Data sheet
CAMC-G-S1 (1501330) Safety module
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO033615
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Material information |
LABS containing materials included, RoHs compliant |
| Nominal voltage logic supply DC [V] | 24 |
| Nominal operating voltage DC [V] | 24 |
| Nominal current logic supply [A] | 0,02 |
| Permitted range logic voltage | ± 20 % |
| Power input logic supply without parking brake [A] | 0,03 |
| Short circuit resistance | no |
| Current carrying capacity at 40°C [A] | 0,2 |
| Fuse (short circuit) | no |
| Design digital output | Potential free signal contact |
| Quantity digital logic inputs | 2 |
| Digital outputs, switching logic | Contact closes when the torque is safely switched off (STO) |
| Dimensions W x L x H | 112.6 mm x 87.2 mm x 28.3 mm |
| LED display product specific | Normal mode (Green)/ STO (Yellow) |
| Safety function | Safe switched off torque (STO) |
| Probability of Failure per Hour in [1/h]. | 1.27e-010 |
| PED (Probability of failure on demand) | 2.3e-005 |
| Proof test interval [A] | 20 |
| Hardware error tolerance | 1 |
| SFF Safe Failure Fraction [%] | 99,2 |
| Certified for safety function to ISO 13849 and IEC 61508 (SIL) | Product can be inserted into SRP/CS to SIL 3 High Demand |
| Safety Integrity Level (SIL) | Safe switched off torque (STO) / SIL 3 / SILCL 3 |
| Performance Level (PL) | Safe switched off torque (STO) / category 4 performance level e |
| Diagnose degree of coverage [%] | 97,0 |
| Certified for safety function to ISO 13849 (PL) | Product can be inserted into SRP/CS to category 4, PL e |
| Permission | TÜV |
| CE certificate (see declaration of conformity) |
nach EU-EMV-Richtlinie, nach EU-Maschinen-Richtlinie, nach EU-RoHS-RL |
| Certified awarding point |
01/205/5165.02/19, TÜV Rheinland |
| Bearing temperature [°C] | -25 to 55 |
| Relative humidity |
5 - 95 %, Not condensing |
| Protection category |
IP20, In mounted condition |
| ambient temperature [°C] | 0 to 40 |
| Fastening type | Plug-in module for CMMP-AS... -M3 |
| installation position | arbitrary |
| Wire ends | Wire end sleeve |
| Connection cross-section [mm²] | 0.25 to 0.5 |
| Electrical connection |
Screw clamp, Plug straight |
| Display | LED green / yellow |
| Operating element | none |
| Logic input specification | Depending on IEC 61131-2 |
| Properties logic inputs | Galvanically separated |
| Work area logic input [V] | 19.2 to 28.8 |
| Max. nominal input current [A] | 0,030 |
| Debounce time inputs [ms] | 0,3 |
| Current carrying capacity per output [mA] | 200 |
| Max. current digital logic outputs [mA] | 200 |
| Output fuses | no |
Further information:
| {{ $t('shop.all.gewicht') }} | 200 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568237943 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 85389099 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.de under item number OT-FESTO033615.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 08.12.2025