Data sheet
VZWF-B-L-M22C-N12-135-V-1P4-10 (1492192) Solenoid valve
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO037472
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Construction set up |
diaphragm valve, Force controlled |
| Actuation type | Electrical |
| Sealing principle | Soft |
| installation position | Magnet vertical |
| Fastening type | pipe installation |
| Fitting connection | 1/2 NPT |
| Electrical connection |
Wiring diagram Form A acc. to EN 175301-803, Plug, Square shape, acc. to EN 175301-803 |
| Nominal width [mm] | 13,5 |
| Valve function | 2/2 closed monostable |
| Hand assist actuation | none |
| Flow direction | Not reversible |
| medium |
Compressed air to ISO 8573-1:2010 [7:-:-], Inert gases, mineral oil, Neutral liquids, Water, Other media on request |
| Nominal pressure PN | 40 |
| pressure difference [bar] | 0 |
| Coil characteristic value | 24 V DC: 11 W |
| Permitted voltage oscillations | ± 10 % |
| Medium pressure [bar] | 0 to 10 |
| Max. viscosity [mm²/s] | 22 |
| Medium temperature [°C] | -10 to 80 |
| ambient temperature [°C] | -10 to 35 |
| Leak rate to EN 12266-1 | A |
| Flow Kv [m³/h] | 2,5 |
| Normal nominal flow [l/min] | 2.660 |
| Shifting time on [ms] | 130 |
| Shifting time off [ms] | 180 |
| Material information |
LABS containing materials included, RoHs compliant |
| Housing material | Brass cast |
| Standard nominal flow rate (standardised to DINa1343) | CW617N |
| Seals material | FPM |
| Screws material | High-alloyed stainless steels |
| Material information | 1.4301 |
| Protection category | IP65 |
| Corrosion resistant class KBK | 1 - low corrosion stress |
Further information:
| {{ $t('shop.all.gewicht') }} | 700 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568235956 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84818087 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.de under item number OT-FESTO037472.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 13.12.2025