Data sheet

3/2- and 5/2-way NAMUR solenoid valve G1/4", 230 V AC
{{ $t('shop.all.artikelnummer') }}:
V 5231-08MG-230V
Example illustration
{{ $t('shop.display.artikel.beschreibung_headline') }}
Materials:
Body and slider: aluminium, seals: NBR, pilot: polyamide
Temperature range:
-5 to +60 °C
Operating pressure:
1,5 to 8 bar
Media:
oiled and unoiled filtered compressed air
Switching time (at 5 bar):
<50 ms, max. 5 switching cycles/sec.
Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance:
± 10 %
Protection class:
IP 65
Structural shape solenoid coil:
T (plug size 1)
Service life:
min. 12 million switching cycles
Advantages:
•Simply by rotating the seal, the valve can be changed between 3/2-way and 5/2-way function
•Economical, as the same valve can be used for single-acting drives.
Information:
These valves are always supplied with a solenoid coil and a connector plug.
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Control voltage 230 V AC
function 5/2-way (spring return) or 3/2-way, NC (spring return)
Thread (1x) G 1/4"
Thread exhaust air (2x) G 1/4"
Nominal width [mm] 5,6
flow [l/min] 1800 oder 1000
Power consumption (AC) [VA] 5
Spare solenoid coil MAG T 230V
Further information:
{{ $t('shop.all.gewicht') }} 330 g / pcs
{{ $t('shop.all.gtin') }} 4050571822286
{{ $t('shop.display.artikel.zollwarennummer') }} 84812090
{{ $t('shop.display.artikel.rohskonform') }} {{ $t('shop.all.ja') }}
{{ $t('shop.all.hersteller') }} EMC
Figure
Drawing:
Drawing: 3/2-way & 5/2-way NAMUR solenoid valve
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 13.12.2025