Data sheet
VPPM-6L-L-1-G18-0L2H-LK-S1 (8024258) Proportional-pressur
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO059767
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Nominal width ventilation [mm] | 6 |
| Nominal width venting [mm] | 4,5 |
| Actuation type | Electrical |
| Sealing principle | Soft |
| installation position | arbitrary |
| Construction set up | Pre-controlled membrane control valve |
| Short circuit resistance | for all electrical connections |
| Safety instructions | Safety position VPPM: For supply line break, the output pressure is retained uncontrolled. |
| Reverse polarity protection | for all electrical connections |
| Reset mode | Mechanical spring |
| Control type | pilot operated |
| Valve function | 3-way proportional pressure regulator valve |
| Display type | LED |
| Pressure regulation range [bar] | 0.02 to 2 |
| Input pressure 1 [bar] | 0 to 4 |
| Max. pressure hysteresis [bar] | 0,01 |
| Eingangsdruck 1/BAR [l/min] | 380 |
| Eingangsdruck 1/MPA [V] | 18 to 30 |
| Max. power input [mA] | 300 |
| Standard nominal flow rate (standardised to DINa1343) | 100 % |
| Max. electrical power consumption [W] | 7 |
| residual ripple | 10 % |
| Operating medium |
Compressed air to ISO 8573-1:2010 [7:4:4], Inert gases |
| Information about operating and control medium | Oiled operation not possible |
| Permission |
RCM mark, c UL us - Listed (OL) |
| KC-mark | KC-EMV |
| Information about operating and control medium | to EU EMC directive |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
| Medium temperature [°C] | 10 to 50 |
| Protection category | IP65 |
| UKCA marking (see declaration of conformity) [°C] | 0 to 60 |
| Linearity error FS [%] | 1 |
| LABS (PWIS) conformity [%/K] | 0,04 |
| Repeatability FS [%] | 0,5 |
| Fastening type |
With throughway bores, With Accessories, Selectively: |
| Pneumatic connection 1 | G1/8 |
| Linearity | G1/8 |
| Pneumatic connection 3 | G1/8 |
| Material information | RoHs compliant |
| Housing material |
Aluminium wrought alloy, anodized |
| Report |
I-port, IO-Link |
| IO-Link, report | Device V 1.1 |
| IO-Link, communication mode | COM1 (4,8 kBaud), COM2 (38,4 kBaud), COM3 (230,4 kBaud) |
| IO-Link, port type | A |
| Material information | 2 Bytes |
| IO-Link, process data width IN | 2 Bytes |
| IO-Link, minimum cycle time | 0.5 ms |
Further information:
| {{ $t('shop.all.gewicht') }} | 500 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568278960 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84811099 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.de under item number OT-FESTO059767.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 13.12.2025