Data sheet
Flow meter/monitor, 30 to 90 l/min, Nickel-plated brass
Item number:
DMWV 10-90 MSV
Example illustration
Item description
Application:
Flow monitors monitor a flow quantity that can be set. If this is exceeded or undershot, a contact gets actuated. A voltage supply is not necessary because of the potential-free reed contacts. The additional scale allows reading the momentary flow directly on the instrument.
Temperature range:
-20 to +120 °C, Environment: max. +80 °C
Protection class:
IP 53
Measurement principle:
Spring loaded float
Installation position:
arbitrarily (preferred from bottom to top)
Direction of flow:
only in one direction
Electrical connection:
Right-angle connector installation size 3, 3-pole (DIN 43650 / EN 175301-803 A) (Flat pin)
Switch type:
Closer (NO)
Switching capacity:
250 V AC, 100 VA, max. 5 A / 250 V DC, 100 W, max. 5 A
Media:
Oils and other fluids with 30 - 600 cSt viscosity (0.1 - 0.8 l/min: max. 400 cSt)
Advantages:
•Scale and switching point do not have to be adjusted according to the medium and pressure.
Properties
| Material | Nickel-plated brass |
| Switching range [l/min] | 30 - 90 |
| Display range [l/min] | 30 - 90 |
| Thread | G 1" |
| PN [bar] | 250 |
Further information:
| Weight | 1,3 kg / pcs |
| GTIN | 4050571253622 |
| Customs duty number | 90261081 |
| RoHS compliant | Yes |
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.de under item number DMWV 10-90 MSV.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 15.05.2025