Data sheet
EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA (8083818) Mini slide unit
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO085028
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Working stroke [mm] | 125 |
| size | 45 |
| Stroke reserve [mm] | 0 |
| Reversing play [µm] | 150 |
| Spindle diameter [mm] | 10 |
| Spindle pitch [mm/U] | 10 |
| installation position | arbitrary |
| Guide | ball guide |
| Construction set up |
Elektrischer Mini-Schlitten, mit Kugelgewindetrieb, mit integriertem Antrieb |
| Motor type | Step motor |
| Referencing |
Fixed stopper block negative, Fixed stopper block positive, Reference switch |
| Spindle type | Ball screw drive |
| Position detection |
für Näherungsschalter, Motorencoder |
| Rotor position transducer | Encoder absolut single turn |
| Rotor position transducer measurement principle | Magnetic |
| Additional functions |
Bedienoberfläche, Integrierte Endlagenerkennung |
| Display | LED |
| Operation-readiness display | LED |
| Max. acceleration [m/s²] | 5 |
| Max. speed [m/s] | 0,25 |
| Repeatability | ±0.015 mm |
| Properties digital logic outputs |
nicht galvanisch getrennt, konfigurierbar |
| Power-on time | 100 % |
| Insulation protection class | B |
| Max. current digital logic outputs [mA] | 100 |
| Max. power input [mA] | 3.000 |
| Nominal voltage DC [V] | 24 |
| Nominal current [A] | 3 |
| Parameterising interface |
IO-Link, Bedienoberfläche |
| Rotor position transducer resolution [Bit] | 16 |
| Permitted voltage oscillations | ± 15 % |
| Voltage supply, connection type | Plug |
| Voltage supply, connection technology | M12x1, T-codiert nach EN 61076-2-111 |
| Voltage supply, number of poles/wires | 4 |
| Permission | RCM mark |
| KC-mark | KC-EMV |
| CE certificate (see declaration of conformity) |
acc. to EU-EMV Directive, acc. to EU-RoHS Directive |
| Oscillation strength | Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Bearing temperature [°C] | -20 to 60 |
| Relative humidity | 0 - 90 % |
| Protection category | IP40 |
| Protection class | III |
| ambient temperature [°C] | 0 to 50 |
| Information about ambient temperature | Oberhalb der Umgebungstemperatur von 30 °C ist eine Leistungsreduktion von 2 % pro K einzuhalten. |
| Dynamic load factor fixed bearing [N] | 7.413 |
| Dynamic load factor linear guide [N] | 3.240 |
| Dynamic load factor ball screw drive [N] | 3.200 |
| Max. force Fy [N] | 1.314 |
| Max. force Fz [N] | 1.314 |
| Max. torque Mx [Nm] | 8,14 |
| Max. torque My [Nm] | 7,05 |
| Max. torque Mz [Nm] | 7,05 |
| Max. radial force on drive shaft [N] | 340 |
| Max. feed force Fx [N] | 120 |
| Guideline payload, horizontal [KGM] | 6 |
| Guideline payload, vertical [KGM] | 6 |
| Static load factor ball screw drive [N] | 5.900 |
| Static load factor linear guide [N] | 5.630 |
| Feed constant [mm/U] | 10 |
| Static load factor fixed bearing [N] | 3.966 |
| Guideline running performance [km] | 5.000 |
| Maintenance interval | Lifetime lubrication |
| Moving mass at 0 mm stroke [g] | 212 |
| Weight supplement per 10 mm stroke [g] | 63 |
| Base weight at 0 mm stroke [g] | 1.238 |
| Supplement moved mass per 10 mm stroke [g] | 30 |
| Quantity digital logic outputs 24 V DC | 2 |
| Quantity digital logic inputs | 2 |
| Logic input specification | in Anlehnung an IEC 61131-2, Typ 1 |
| Work area logic input [V] | 24 |
| IO-Link, SIO mode support | yes |
| Properties logic inputs |
nicht galvanisch getrennt, konfigurierbar |
| IO-Link, report | Device V 1.1 |
| IO-Link, communication mode | COM3 (230.4 kBaud) |
| IO-Link, port type | A |
| IO-Link, number of ports | 1 |
| IO-Link, process data width OUT | 2 Bytes |
| IO-Link, process data contents OUT |
1 bit (Move in), 1 bit (Move out), 1 bit (Quit Error) |
| IO-Link, process data width IN | 2 Bytes |
| IO-Link, process data contents IN |
1 bit (State Device), 1 bit (State Move), 1 bit (State in), 1 bit (State out) |
| IO-Link, service data unit IN |
32 bit Force, 32 bit Position, 32 bit Speed |
| IO-Link, minimum cycle time | 1 ms |
| IO-Link, data memory needed [Byte] | 500 |
| Max. line length |
20 m bei IO-Link Betrieb, 15 m Ausgänge, 15 m Eingänge |
| Switching logic outputs | PNP (Positive switching) |
| Switching logic inputs | PNP (Positive switching) |
| IO-Link, connection technology | Plug |
| Logic interface, connection type | Plug |
| Logic interface, connection technology | M12x1 A coded to EN 61076-2-101 |
| Logic interface, number of pins/wires | 8 |
| Logic interface, plug pattern | 00992264 |
| Fastening type |
with female threads, with centring sleeve, with accessories, with cylinder pin |
| Material information |
LABS containing materials included, RoHs compliant |
| Carriage guide material | Roller bearing steel |
| Guide carriage material | Roller bearing steel |
| Housing material | Aluminium wrought alloy, anodised |
| Joch plate material | Aluminium wrought alloy, anodised |
| Piston rod material | High-alloyed stainless steels |
| Carriage material | Aluminium wrought alloy, anodised |
| Spindle nut material | Roller bearing steel |
| Spindle material | Roller bearing steel |
Further information:
| {{ $t('shop.all.gewicht') }} | 2 kg / pcs |
| {{ $t('shop.all.gtin') }} | 4052568457723 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84798997 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.de under item number OT-FESTO085028.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 13.12.2025