Data sheet
HGPM-12-EZ-G9 (197570) Parallel gripper
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO008850
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| size | 12 |
| Stroke per gripper jaw [mm] | 3 |
| Max. exchange precision [mm] | 0,2 |
| Max. angular gripper jaw backlash ax, ay [mm] | <= 0,05 mm |
| Quantity Gripper jaws | 2 |
| Principle of operation |
single action, closed |
| Gripper function | Parallel |
| Construction set up | Inclined plane |
| Position detection | without |
| Operating pressure [bar] | 4 to 8 |
| Max. working frequency gripper [Hz] | 4 |
| Min. opening time a 6 bar [ms] | 3,0 |
| Min. closing time at 6 bar [ms] | 8,3 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible (required in further operations) |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 1 - low corrosion stress |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) [°C] | 5 to 60 |
| Information about operating and control medium [N] | 30 |
| Max. torque on gripper jaws Mx static [Nm] | 0,5 |
| LABS (PWIS) conformity [Nm] | 0,5 |
| Max. torque on gripper jaws Mz static [Nm] | 0,5 |
| Total gripping force, opening, 0.6MPa (6bar, 87 psi) | with female thread |
| Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) | M3 |
| Material information | Copper and PTFE-free |
| Cover cap material | POM |
| Housing material |
Aluminium wrought alloy, anodized |
| Gripper jaws material | High-alloyed steel |
| Close total gripping force at 6 bar [N] | 35 |
| Open gripper jaws at gripping force of 6 bar [N] | 17,5 |
Further information:
| {{ $t('shop.all.gewicht') }} | 155 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568160678 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84798997 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.de under item number OT-FESTO008850.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 08.12.2025