Data sheet
MLO-POT-360-LWG (152647) Displacement encoder
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO009168
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Measurement principle travel measurement system | Analogue |
| ambient temperature [°C] | -30 to 100 |
| Recommended grinder current [µA] | < 1 µA |
| Max. grinder current short term [µA] | 10.000 |
| Max. movement speed [m/s] | 5 |
| Max. movement acceleration [m/s²] | 200 |
| Resolution travel [mm] | 0,01 |
| Independent linearity | 0.05 % |
| Temperature coefficient [ppm/K] | 5 |
| Stroke [mm] | 360 |
| output signal | Analogue |
| Connection resistance [kOhm] | 5 |
| Tolerance connection resistance [%] | 20 |
| Nominal operating voltage DC [V] | 10 |
| Max. operating voltage DC [V] | 42 |
| Permitted voltage oscillations | < 1 % |
| Max. power input [mA] | 4 |
| Electrical connection |
16 mm, 4 pin, Plug, Square shape |
| Construction set up |
With Pusher rod, Round profile |
| Angle offset carrier | ± 12.5 ° |
| installation position | arbitrary |
| Housing material |
Aluminium wrought alloy, anodized |
| Cover material | PBT reinforced |
| Pusher rod material | High-alloyed stainless steels |
| Bearing seal material | NBR |
| Rod seal material | PTFE |
| Protection category |
IP65, acc. to IEC 60529 |
| Oscillation strength to DIN/IEC 68 part 2-6 | Tested to severity class 2 |
| Continuous impact strength DIN&EC 68 parts 2-82 | Tested to severity class 2 |
Further information:
| {{ $t('shop.all.gewicht') }} | 1,1 kg / pcs |
| {{ $t('shop.all.gtin') }} | 4052568117634 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 90318020 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.de under item number OT-FESTO009168.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 08.12.2025