Data sheet
MME-MTS-360-TLF-AIF (178308) Displacement encoder
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO009184
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| CE certificate (see declaration of conformity) | to EU EMC directive |
| UKCA marking (see declaration of conformity) | Digital |
| ambient temperature [°C] | -40 to 75 |
| Max. movement speed [m/s] | 10 |
| Max. movement acceleration [m/s²] | 200 |
| Resolution travel [mm] | < 0,01 mm |
| Independent linearity |
0.02 %, at least ± 50 µm |
| Temperature coefficient [ppm/K] | 15 |
| Stroke [mm] | 360 |
| output signal | CAN protocol type SPF-AIF |
| Nominal operating voltage DC [V] | 24 |
| Permitted voltage oscillations | -15 % / +20 % |
| Max. power input [mA] | 90 |
| Electrical connection |
6 pin, In compliance with DIN 45322, Round shape, Plug |
| Construction set up |
Closed profile, With Sliding carriage |
| Parallel offset coupling | ± 1,5 mm |
| Angle offset carrier | ± 1 ° |
| installation position | arbitrary |
| Housing material |
Aluminium wrought alloy, anodized |
| Sliding carriage housing material |
PBT reinforced, Permanent magnet |
| Sliding carriage housing material | Steel |
| Sliding carriage coupling material |
Aluminium die casting, painted |
| Assembly clamps material | PEI |
| Protection category |
IP65, acc. to IEC 60529 |
| Oscillation strength to DIN/IEC 68 part 2-6 | Tested to severity class 1 |
| Continuous impact strength DIN&EC 68 parts 2-82 | Tested to severity class 1 |
Further information:
| {{ $t('shop.all.gewicht') }} | 1.000 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568144128 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 90318020 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.de under item number OT-FESTO009184.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 08.12.2025