Safety coupling socket (NW7,2) G 3/8"(Female thread), Standard
Item number: KDGISI 38 NW7
|Thread internal||G 3/8"|
|actual nominal width [mm]||7,8|
|Operating pressure [bar]||0 - 12|
|Weight||135 g / Pcs|
|Customs duty number||84812090|
Description - Safety coupling socket (NW7,2) G 3/8"(Female thread), Standard
Housing: nickel-plated brass, nickel-plated steel, seal: NBR
-20°C bis +100°C
0 - 12 bar (Eco: up to max. 8* bar)
1800 l/min (Eco: 1100 l/min (input pressure: 6 bar, max. pressure drop: 0,5 bar)
The coupling occurs as for standard couplings, by inserting the push in nipple into the coupling socket. Uncoupling occurs in two steps: By pushing back the unlocking sleeve, the coupling socket closes and ventilates the coupling plug while this is still held in the coupling socket. The plug is then released by pulling the unlocking sleeve. The dangerous recoil effect is thus prevented.
•no risk of injury when releasing the coupling as the plug does not jump out, •easy to use (release like standard couplings)
Use coupling plugs made of hardened steel!
Rectus (25, 26, 1600, 1625), TEMA (1600), CEJN (320), JWL (520, 530, 560), Legris (25, 26), Parker (PE, PEF), Prevost (E ... 07), Festo (KD4 / KS4), IMI-Norgren (238), Aventics (CP1-NW 7 / 7,8) und viele andere deutsche Fabrikate
**Names and designations are partly trademarks of the manufacturers entered.
*corresponds with 35 bar static operating pressure (without pulsation)
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
PTFE sealing tape, standard quality
Thread seals, Loxeal
PVC gaskets, standard
Coupling plug With Male thread, NW 7.2
Coupling plug With female thread, NW 7.2
Coupling plug with hose screw connection, NW 7.2
Coupling plug With Male thread & rotary joint, NW 7.2
dust protection caps, NW 7.2
Push-in fittings, Standard