Design |
Angular
|
Based on standard |
EN 60947-5-2, ISO 5211, VDI/VDE 3845
|
CE certificate (see declaration of conformity) |
to EU EMC directive
|
ATEX gas category |
II 2G
|
Ex ignition protection type gas |
AEx d IIB T5 Gb, AEx nA IIC T5 Gc, Ex d IIB T5 Gb, Ex nA IIC T5 Gc
|
ATEX dust category |
II 2D
|
Ex ignition protection type dust |
AEx tb IIIC T108°C Db, Ex tb IIIC T108°C Db
|
Ex protection approval outside of the EU |
Class I, Div. 1 (CA), Class I, Div. 1 (US), Class I, Div. 2 (CA), Class I, Div. 2 (US), Class II, Div. 1 (CA), Class II, Div. 1 (US), Class III (CA), Class III (US), EPL Db (CA), EPL Db (US), EPL Gb (CA), EPL Gb (US), EPL Gc (CA), EPL Gc (US)
|
Ex ambient temperature |
-20°C <= Ta <= +60°C
|
Certified awarding point |
CSA 263311
|
Material information |
LABS containing materials included, RoHs compliant
|
Safety Integrity Level (SIL) |
SIL 2
|
Measurement principle |
Inductive
|
ambient temperature [°C] |
-20 to 60
|
Control output |
NPN
|
Switching element function |
NO contact
|
Max. output current DC [mA] |
100
|
Operating voltage range DC [V] |
10 to 30
|
Electrical connection |
10 pin, Screw clamp
|
Lockable conductor nominal cross-section [mm²] |
0.25 to 2.5
|
Cable screwing |
1/2 NPT
|
Fastening type |
on flange according to ISO 5211, With mounting brackets
|
installation position |
arbitrary
|
Housing colour |
silver
|
Housing material |
Aluminium die casting
|
Seals material |
NBR
|
Shaft material |
High-alloyed stainless steels
|
Screws material |
High-alloyed stainless steels
|
Mounting bracket material |
High-alloyed stainless steels
|
Pointer material |
PC
|
Circlip material |
High-alloyed stainless steels
|
Washer material |
High-alloyed stainless steels
|
position indicator |
yellow / red
|
Settings range angle recording [deg] |
0 to 90
|
Bearing temperature [°C] |
-20 to 60
|
Protection category |
IP67, NEMA 4/4X
|
Shock resistance |
Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27
|
Oscillation strength |
Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6
|
Degree of contamination |
3
|
Permission |
RCM mark
|
Voltage drop [V] |
<= 3 V
|
Residual current [mA] |
0 to 0.5
|
Short circuit resistance |
Cycling
|
Empty run current [mA] |
<= 15 mA
|
Reverse polarity protection |
for all electrical connections
|