Navojne spojke za manometre (vijacna zveza za cev)

Opis

Zinc-plated steel type


Materials:
Bodies: Zinc plated steel, any existing elastomer seal: NBR

Temperature range:
-40°C to max. +120°C (with an elastomer seal: -35°C to max. +100°C)

Stainless steel type and NC screw connection


Materials:
Body: 1.4571, any existing elastomer seal: FKM

Temperature range:
-60°C up to max. +400°C (with elastomer seal: -20°C to max. +200°C, NC screw connections on request up to +550°C)

Montage cutting ring screw connections and NC compression ring fittings
1) Cut the tube away at a right angle and lightly deburr and clean the inside and outside. Do not use a tube cutter. In the case of thin-walled or soft pipes a reinforcing ring must be used.
2) Thoroughly oil the socket threads and cone, inner union nuts and cutting ring. For stainless steel cutting ring connections PASTE ES must be used (optional for NC screw connections).
3) Push the union nut and cutting ring onto the tube. Ensure the correct position of the cutting ring/NC compression ring - otherwise the assembly will be incorrect.
4) Loosen the union nut as far as possible by hand. Attach the marking of the union nut for checking the specified rotations. Press tube in the cone until the stop. Tighten the union nut with screw wrench approx. 1 rotation. The tube must not be rotated.
5) Loosen the union nut to check the assembly. Cutting ring: The raised tube material must cover the front cutting ring area. If not, retighten slightly. Due to the spring effect of the cutting ring, this can still be rotated - no functional error. NC compression ring: The compression ring can no longer be displaced.
6) Final assembly: Assemble the union nuts on sockets until there is a noticeable increase in force. Then tighten with 1/4 - 1/2 rotation (cutting ring fitting), or 3/4 rotation (NC compression ring fitting).

Warning:
Assembly of stainless steel screw connections only with the aid of suitable lubricant.

Notes on NC compression ring fittings


Advantages:
• Compatible with all cutting ring fittings according to DIN EN ISO 8434-1 (DIN 2353). Also resistant to dynamic loads such as vibrations and pulsations. It can be loosened and screwed back in as often as is necessary.
• In contrast to a cutting ring the NC compression ring is not hardened, therefore it cannot rust and has good chemical resistance.
• Lubrication of the nut thread for initial assembly is not necessary,
•Vacuum tightness Q< 10^8 mbar l/s,
•Ideal for use in gas and water area

Required tube quality:
The screw connections must be processed with heat treated, seamless stainless steel tubes (1.4571) according to DIN EN ISO 1127. The tolerance category should be D4/T3, the surface must not show any damage and its hardness should not be more than Rockwel HRB 90.

Poiščite ustrezen izdelek

Material
Serija
Ø cevi zunanji
Notranji navoj
Obratovalni tlak
Temperaturno območje

Navojne spojke za manometre (vijacna zveza za cev): 20 od 25 izdelkov

MAV 4 LLR
Pressure gauge cutting ring fitt. G 1/4"-4 LL (M8x1), Jeklo, pocinkano (MAV 4 LLR)

Jeklo, pocinkano Jeklo, pocinkano

Pressure gauge cutting ring fitt. G 1/4"-4 LL (M8x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    4 LL (M8x1)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

11,68 €

MAV 6 LR
Pressure gauge cutting ring fitt. G 1/4"-6 L (M12x1,5), Jeklo, pocinkano (MAV 6 LR)

Jeklo, pocinkano Jeklo, pocinkano

Pressure gauge cutting ring fitt. G 1/4"-6 L (M12x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    6 L (M12x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

4,67 €

MAV 8 LR
Pressure gauge cutting ring fitt. G 1/4"-8 L (M14x1,5), Jeklo, pocinkano (MAV 8 LR)

Jeklo, pocinkano Jeklo, pocinkano

Pressure gauge cutting ring fitt. G 1/4"-8 L (M14x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    8 L (M14x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

3,72 €

MAV 10 LR
Pressure gauge cutting ring fitt. G 1/4"-10 L (M16x1,5), Jeklo, pocinkano (MAV 10 LR)

Jeklo, pocinkano Jeklo, pocinkano

Pressure gauge cutting ring fitt. G 1/4"-10 L (M16x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    10 L (M16x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

4,11 €

MAV 12 LR
Pressure gauge cutting ring fitt. G 1/4"-12 L (M18x1,5), Jeklo, pocinkano (MAV 12 LR)

Jeklo, pocinkano Jeklo, pocinkano

Pressure gauge cutting ring fitt. G 1/4"-12 L (M18x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    12 L (M18x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

5,49 €

MAV 6 SR
Pressure gauge cutting ring fitt. G 1/2"-6 S (M14x1,5), Jeklo, pocinkano (MAV 6 SR)

Jeklo, pocinkano Jeklo, pocinkano

Pressure gauge cutting ring fitt. G 1/2"-6 S (M14x1,5), Jeklo, pocinkano
  • Serija

    težka serija

  • Ø cevi zunanji

    6 S (M14x1,5)

  • Notranji navoj

    G 1/2"

  • Obratovalni tlak

    630

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

6,50 €

MAV 8 SR
Pressure gauge cutting ring fitt. G 1/2"-8 S (M16x1,5), Jeklo, pocinkano (MAV 8 SR)

Jeklo, pocinkano Jeklo, pocinkano

Pressure gauge cutting ring fitt. G 1/2"-8 S (M16x1,5), Jeklo, pocinkano
  • Serija

    težka serija

  • Ø cevi zunanji

    8 S (M16x1,5)

  • Notranji navoj

    G 1/2"

  • Obratovalni tlak

    630

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

6,60 €

MAV 10 SR
Pressure gauge cutting ring fitt. G 1/2"-10 S (M18x1,5), Jeklo, pocinkano (MAV 10 SR)

Jeklo, pocinkano Jeklo, pocinkano

Pressure gauge cutting ring fitt. G 1/2"-10 S (M18x1,5), Jeklo, pocinkano
  • Serija

    težka serija

  • Ø cevi zunanji

    10 S (M18x1,5)

  • Notranji navoj

    G 1/2"

  • Obratovalni tlak

    630

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

6,92 €

MAV 12 SR
Pressure gauge cutting ring fitt. G 1/2"-12 S (M20x1,5), Jeklo, pocinkano (MAV 12 SR)

Jeklo, pocinkano Jeklo, pocinkano

Pressure gauge cutting ring fitt. G 1/2"-12 S (M20x1,5), Jeklo, pocinkano
  • Serija

    težka serija

  • Ø cevi zunanji

    12 S (M20x1,5)

  • Notranji navoj

    G 1/2"

  • Obratovalni tlak

    630

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

7,06 €

Pressure gauge cutting ring fitt. G 1/4"-6 L (M12x1,5), 1.4571
  • Serija

    prazna serija

  • Ø cevi zunanji

    6 L (M12x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

25,41 €

Pressure gauge cutting ring fitt. G 1/4"-8 L (M14x1,5), 1.4571
  • Serija

    prazna serija

  • Ø cevi zunanji

    8 L (M14x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

26,39 €

Pressure gauge cutting ring fitt. G 1/4"-10 L (M16x1,5), 1.4571
  • Serija

    prazna serija

  • Ø cevi zunanji

    10 L (M16x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

27,80 €

Pressure gauge cutting ring fitt. G 1/4"-12 L (M18x1,5), 1.4571
  • Serija

    prazna serija

  • Ø cevi zunanji

    12 L (M18x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

28,65 €

Pressure gauge cutting ring fitt. G 1/2"-6 S (M14x1,5), 1.4571
  • Serija

    težka serija

  • Ø cevi zunanji

    6 S (M14x1,5)

  • Notranji navoj

    G 1/2"

  • Obratovalni tlak

    630

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

37,13 €

Pressure gauge cutting ring fitt. G 1/2"-8 S (M16x1,5), 1.4571
  • Serija

    težka serija

  • Ø cevi zunanji

    8 S (M16x1,5)

  • Notranji navoj

    G 1/2"

  • Obratovalni tlak

    630

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

37,91 €

Pressure gauge cutting ring fitt. G 1/2"-10 S (M18x1,5), 1.4571
  • Serija

    težka serija

  • Ø cevi zunanji

    10 S (M18x1,5)

  • Notranji navoj

    G 1/2"

  • Obratovalni tlak

    630

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

39,63 €

Pressure gauge cutting ring fitt. G 1/2"-12 S (M20x1,5), 1.4571
  • Serija

    težka serija

  • Ø cevi zunanji

    12 S (M20x1,5)

  • Notranji navoj

    G 1/2"

  • Obratovalni tlak

    630

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

41,15 €

MAV 6 LR NC
Pressure gauge cutting ring fitt. G 1/4"-6 L (M12x1,5), Prižemni obroc1.4571 (NC) (MAV 6 LR NC)

Prižemni obroč<br>1.4571 (NC) Prižemni obroč
1.4571 (NC)

Pressure gauge cutting ring fitt. G 1/4"-6 L (M12x1,5), Prižemni obroc1.4571 (NC)
  • Serija

    prazna serija

  • Ø cevi zunanji

    6 L (M12x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

32,05 €

MAV 8 LR NC
Pressure gauge cutting ring fitt. G 1/4"-8 L (M14x1,5), Prižemni obroc1.4571 (NC) (MAV 8 LR NC)

Prižemni obroč<br>1.4571 (NC) Prižemni obroč
1.4571 (NC)

Pressure gauge cutting ring fitt. G 1/4"-8 L (M14x1,5), Prižemni obroc1.4571 (NC)
  • Serija

    prazna serija

  • Ø cevi zunanji

    8 L (M14x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

34,72 €

MAV 10 LR NC
Pressure gauge cutting ring fitt. G 1/4"-10 L (M16x1,5), Prižemni obroc1.4571 (NC) (MAV 10 LR NC)

Prižemni obroč<br>1.4571 (NC) Prižemni obroč
1.4571 (NC)

Pressure gauge cutting ring fitt. G 1/4"-10 L (M16x1,5), Prižemni obroc1.4571 (NC)
  • Serija

    prazna serija

  • Ø cevi zunanji

    10 L (M16x1,5)

  • Notranji navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    od -60 do +400

Takoj dobavljivo

36,43 €

Vse navedbe podatkov so nezavezujoče priporočene vrednosti! Za izbiro podatkov, za katere ne izdamo dodatnega pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka v kolikor ni navedeno drugače se nanašajo na tekočine skupine II. pri +20°C.