Ravne vijacne zveze, navojem G / navojem R

Opis

Zinc-plated steel type


Materials:
Bodies: Zinc plated steel, any existing elastomer seal: NBR

Temperature range:
-40°C to max. +120°C (with an elastomer seal: -35°C to max. +100°C)

Stainless steel type and NC screw connection


Materials:
Body: 1.4571, any existing elastomer seal: FKM

Temperature range:
-60°C up to max. +400°C (with elastomer seal: -20°C to max. +200°C, NC screw connections on request up to +550°C)

Montage cutting ring screw connections and NC compression ring fittings
1) Cut the tube away at a right angle and lightly deburr and clean the inside and outside. Do not use a tube cutter. In the case of thin-walled or soft pipes a reinforcing ring must be used.
2) Thoroughly oil the socket threads and cone, inner union nuts and cutting ring. For stainless steel cutting ring connections PASTE ES must be used (optional for NC screw connections).
3) Push the union nut and cutting ring onto the tube. Ensure the correct position of the cutting ring/NC compression ring - otherwise the assembly will be incorrect.
4) Loosen the union nut as far as possible by hand. Attach the marking of the union nut for checking the specified rotations. Press tube in the cone until the stop. Tighten the union nut with screw wrench approx. 1 rotation. The tube must not be rotated.
5) Loosen the union nut to check the assembly. Cutting ring: The raised tube material must cover the front cutting ring area. If not, retighten slightly. Due to the spring effect of the cutting ring, this can still be rotated - no functional error. NC compression ring: The compression ring can no longer be displaced.
6) Final assembly: Assemble the union nuts on sockets until there is a noticeable increase in force. Then tighten with 1/4 - 1/2 rotation (cutting ring fitting), or 3/4 rotation (NC compression ring fitting).

Warning:
Assembly of stainless steel screw connections only with the aid of suitable lubricant.

Notes on NC compression ring fittings


Advantages:
• Compatible with all cutting ring fittings according to DIN EN ISO 8434-1 (DIN 2353). Also resistant to dynamic loads such as vibrations and pulsations. It can be loosened and screwed back in as often as is necessary.
• In contrast to a cutting ring the NC compression ring is not hardened, therefore it cannot rust and has good chemical resistance.
• Lubrication of the nut thread for initial assembly is not necessary,
•Vacuum tightness Q< 10^8 mbar l/s,
•Ideal for use in gas and water area

Required tube quality:
The screw connections must be processed with heat treated, seamless stainless steel tubes (1.4571) according to DIN EN ISO 1127. The tolerance category should be D4/T3, the surface must not show any damage and its hardness should not be more than Rockwel HRB 90.

Poiščite ustrezen izdelek

Material
Serija
Ø cevi zunanji
Vijačni navoj
Obratovalni tlak
Temperaturno območje

Ravne vijacne zveze, navojem G / navojem R: 20 od 165 izdelkov

GE 4 LLR
Straight cutting ring fitt. R 1/8"-4 LL (M8x1), Jeklo, pocinkano (GE 4 LLR)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. R 1/8"-4 LL (M8x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    4 LL (M8x1)

  • Vijačni navoj

    R 1/8"

  • Obratovalni tlak

    100

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

1,80 €

GE 5 LLR
Straight cutting ring fitt. R 1/8"-5 LL (M10x1), Jeklo, pocinkano (GE 5 LLR)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. R 1/8"-5 LL (M10x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    5 LL (M10x1)

  • Vijačni navoj

    R 1/8"

  • Obratovalni tlak

    100

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

2,26 €

GE 6 LLR
Straight cutting ring fitt. R 1/8"-6 LL (M10x1), Jeklo, pocinkano (GE 6 LLR)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. R 1/8"-6 LL (M10x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    6 LL (M10x1)

  • Vijačni navoj

    R 1/8"

  • Obratovalni tlak

    100

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

1,84 €

GE 8 LLR
Straight cutting ring fitt. R 1/8"-8 LL (M12x1), Jeklo, pocinkano (GE 8 LLR)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. R 1/8"-8 LL (M12x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    8 LL (M12x1)

  • Vijačni navoj

    R 1/8"

  • Obratovalni tlak

    100

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

2,14 €

GE 8 LLR ZYL
Straight cutting ring fitt. G 1/8"-8 LL (M12x1), Jeklo, pocinkano (GE 8 LLR ZYL)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 1/8"-8 LL (M12x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    8 LL (M12x1)

  • Vijačni navoj

    G 1/8"

  • Obratovalni tlak

    100

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

4,27 €

GE 8 LLR 1/4
Straight cutting ring fitt. R 1/4"-8 LL (M12x1), Jeklo, pocinkano (GE 8 LLR 1/4)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. R 1/4"-8 LL (M12x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    8 LL (M12x1)

  • Vijačni navoj

    R 1/4"

  • Obratovalni tlak

    100

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

1,96 €

GE 10 LLR
Straight cutting ring fitt. R 1/4"-10 LL (M14x1), Jeklo, pocinkano (GE 10 LLR)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. R 1/4"-10 LL (M14x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    10 LL (M14x1)

  • Vijačni navoj

    R 1/4"

  • Obratovalni tlak

    100

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

2,05 €

GE 12 LLR
Straight cutting ring fitt. R 1/4"-12 LL (M16x1), Jeklo, pocinkano (GE 12 LLR)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. R 1/4"-12 LL (M16x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    12 LL (M16x1)

  • Vijačni navoj

    R 1/4"

  • Obratovalni tlak

    100

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

2,48 €

GE 12 LLR 3/8
Straight cutting ring fitt. R 3/8"-12 LL (M16x1), Jeklo, pocinkano (GE 12 LLR 3/8)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. R 3/8"-12 LL (M16x1), Jeklo, pocinkano
  • Serija

    zelo lahka serija

  • Ø cevi zunanji

    12 LL (M16x1)

  • Vijačni navoj

    R 3/8"

  • Obratovalni tlak

    100

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

2,84 €

GE 6 LR
Straight cutting ring fitt. G 1/8"-6 L (M12x1,5), Jeklo, pocinkano (GE 6 LR)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 1/8"-6 L (M12x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    6 L (M12x1,5)

  • Vijačni navoj

    G 1/8"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

1,54 €

GE 6 LR 1/4
Straight cutting ring fitt. G 1/4"-6 L (M12x1,5), Jeklo, pocinkano (GE 6 LR 1/4)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 1/4"-6 L (M12x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    6 L (M12x1,5)

  • Vijačni navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

2,22 €

GE 6 LR 3/8
Straight cutting ring fitt. G 3/8"-6 L (M12x1,5), Jeklo, pocinkano (GE 6 LR 3/8)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 3/8"-6 L (M12x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    6 L (M12x1,5)

  • Vijačni navoj

    G 3/8"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

3,04 €

GE 6 LR 1/2
Straight cutting ring fitt. G 1/2"-6 L (M12x1,5), Jeklo, pocinkano (GE 6 LR 1/2)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 1/2"-6 L (M12x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    6 L (M12x1,5)

  • Vijačni navoj

    G 1/2"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

11,11 €

GE 8 LR
Straight cutting ring fitt. G 1/4"-8 L (M14x1,5), Jeklo, pocinkano (GE 8 LR)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 1/4"-8 L (M14x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    8 L (M14x1,5)

  • Vijačni navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

1,93 €

GE 8 LR 1/8
Straight cutting ring fitt. G 1/8"-8 L (M14x1,5), Jeklo, pocinkano (GE 8 LR 1/8)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 1/8"-8 L (M14x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    8 L (M14x1,5)

  • Vijačni navoj

    G 1/8"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

3,15 €

GE 8 LR 3/8
Straight cutting ring fitt. G 3/8"-8 L (M14x1,5), Jeklo, pocinkano (GE 8 LR 3/8)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 3/8"-8 L (M14x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    8 L (M14x1,5)

  • Vijačni navoj

    G 3/8"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

2,79 €

GE 8 LR 1/2
Straight cutting ring fitt. G 1/2"-8 L (M14x1,5), Jeklo, pocinkano (GE 8 LR 1/2)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 1/2"-8 L (M14x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    8 L (M14x1,5)

  • Vijačni navoj

    G 1/2"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

5,92 €

GE 10 LR
Straight cutting ring fitt. G 1/4"-10 L (M16x1,5), Jeklo, pocinkano (GE 10 LR)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 1/4"-10 L (M16x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    10 L (M16x1,5)

  • Vijačni navoj

    G 1/4"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

2,07 €

GE 10 LR 1/8
Straight cutting ring fitt. G 1/8"-10 L (M16x1,5), Jeklo, pocinkano (GE 10 LR 1/8)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 1/8"-10 L (M16x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    10 L (M16x1,5)

  • Vijačni navoj

    G 1/8"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

4,68 €

GE 10 LR 3/8
Straight cutting ring fitt. G 3/8"-10 L (M16x1,5), Jeklo, pocinkano (GE 10 LR 3/8)

Jeklo, pocinkano Jeklo, pocinkano

Straight cutting ring fitt. G 3/8"-10 L (M16x1,5), Jeklo, pocinkano
  • Serija

    prazna serija

  • Ø cevi zunanji

    10 L (M16x1,5)

  • Vijačni navoj

    G 3/8"

  • Obratovalni tlak

    315

  • Temperaturno območje

    -40 do +120

Takoj dobavljivo

2,72 €

Vse navedbe podatkov so nezavezujoče priporočene vrednosti! Za izbiro podatkov, za katere ne izdamo dodatnega pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka v kolikor ni navedeno drugače se nanašajo na tekočine skupine II. pri +20°C.